English
Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
Polski
پیدا شد 66 نتایج برای "
underground electrical cable
"
YJV 0.6/1kV Copper PVC Sheath Xlpe Power Cable 3*95mm2 70mm 3core 3x6mm Steel Tape Armoured Cable This YJV steel tape armoured power cable is designed for fixed power distribution installations with a rated voltage of 0.6/1kV. The cable features a mixed conductor configuration comprising three main power cores (3×95mm²), a reduced neutral core (70mm²), and three control/auxiliary cores (3×6mm²)—all housed within a single XLPE-insulated, steel tape armoured structure with a
High Voltage Cable YJV22 1KV/8.7KV/36KV 3*70/95/120 Copper Core XLPE PVC Insulated Cable Product Description The maximum rated temperature of the cable conductor is 90 ° C. During a short circuit (with a maximum duration of no more than 5 seconds), the maximum rated temperature of the cable conductor is 2.The temperature should not exceed 250 ° C. The ambient temperature during cable laying should not be lower than 0 ° C 3. Allowable bending radius during laying: Single core
Heat Shrink Cable Termination Kit For Power Cable (MV / HV Systems) The Heat Shrink Cable Termination Kit is an electrical accessory designed for terminating medium and high-voltage power cables in distribution and transmission networks. It relies on thermally activated polymer tubing that contracts under controlled heating, forming a tight insulating and sealing layer over prepared cable ends. This solution is widely applied in utility grids, industrial power systems, and
THHN CABLE 600V Copper Nylon Sheath Building Wire for Electrical Wiring Description THHN cable is 600V building wire with PVC insulation and nylon sheath, featuring heat resistance, flame retardant, oil and abrasion resistance. It is widely used for indoor conduit wiring, residential, commercial and industrial building power distribution, suitable for dry and damp indoor locations. Quick Detail 600V rated voltage for general electrical applications Stranded / solid bare
XLPE Insulated Power Cable WDZN-YJY 0.6/1kV 4×35+1×16 Low Smoke Zero Halogen The WDZN-YJY 0.6/1kV 4×35+1×16 mm² Low Smoke Zero Halogen (LSZH) Power Cable is a high-performance copper core electrical cable designed for modern power distribution systems requiring enhanced fire safety, environmental protection, and stable electrical transmission. Manufactured with high-purity copper conductors, XLPE insulation, and LSZH outer sheath materials, this cable offers excellent flame
KVV Control Cable 450/750V PVC Insulated PVC Sheathed Multi Core Control Cable Manufacturer KVV control cable is a PVC insulated and PVC sheathed control cable designed for signal transmission, monitoring circuits, and control systems. It is widely used in industrial plants, power stations, substations, manufacturing facilities, and building automation projects. Manufactured according to IEC, GB, and BS standards, KVV cables provide stable electrical performance, reliable
EC Standard KVV Control Cable 450/750V Multi Core PVC Control Cable KVV cable is a multi-core PVC insulated and PVC sheathed control cable developed for control, signaling, monitoring and protection circuits. It is commonly installed in industrial automation systems, electrical distribution facilities, manufacturing plants, substations and infrastructure projects. Designed for fixed installation, KVV control cables provide dependable signal transmission, excellent insulation
Overhead Insulated Cable Aluminum Conductor Cable JKLYJ Wire 1KV Single-core Overhead Cable JKLYJ cable is a 1kV single-core overhead insulated cable featuring aluminum conductor and XLPE insulation. Designed for fixed overhead power distribution lines of AC rated voltage 1kV and below, this cable is widely used in urban and forest area power grid reconstruction projects, where reliability and weather resistance are critical requirements. Key Features and Advantages Compared
YJV22 10kV 35kV High Voltage Copper Cable, XLPE Insulated, Steel Tape Armored, Power Cable Structural Description Copper Conductor: Compactly stranded circular structure, oxygen content ≤0.02%, conductivity not less than 97% IACS. Nominal Cross-Section: 10kV commonly 25~630mm²; 35kV commonly 50~400mm² (single-core or three-core). Conductor Shielding: Extruded semi-conductive layer, uniform electric field, preventing void discharge. XLPE Insulation: Cross-linked polyethylene,
