GYTS-type Non-self-supporting Aerial Fibre-optic Cable Outdoor Fibre-optic Cable

Product Introduction

The structure of GYTS [Metal Reinforced Component, Loose Tube Layered Filled, Steel-Polyethylene Bonded Sheath Outdoor Communication Optical Cable] optical cable is that single-mode or multi-mode optical fibers are inserted into loose tubes made of high modulus plastic and filled with waterproof compound. At the center of the cable core is a metal reinforcing member. For some optical cables with certain core numbers, a layer of polyethylene is extruded outside the metal center reinforcing member. The loose tubes (and filling ropes) are stranded around the center reinforcing member to form a compact and round cable core. The gaps inside the cable core are filled with water-blocking compound and then extruded with a steel-polyethylene bonded sheath to form the cable.

Product Specifications

Note: 1. D refers to the diameter of the optical cable
2. Typical values may be adjusted as appropriate depending on actual conditions
3. Products can be designed to meet specific customer requirements

Fibre-optic Cable application

Outdoor overhead telecommunications cabling
Long-distance signal transmission for metropolitan and backbone networks
Structured cabling for residential estates and commercial buildings
Laying of backbone lines for telecommunications operators
Telecommunications infrastructure for motorways and railways
Long-distance network communications for industrial sites
Outdoor overhead and duct-laid telecommunications projects

FAQ

Q1: What is GYTS fibre optic cable?

A: GYTS is a non-self-supporting aerial armoured fibre optic cable, designed for outdoor overhead and pipeline laying.

Q2: What is the main feature of GYTS cable?

A: With steel tape armour, good compression resistance, tensile strength and anti-aging performance, suitable for long-distance outdoor use.

Q3: What core counts are available?

A: Multiple options: 30/36/60/72/96/120/144/288 cores, support custom specification.

Q4: Where is GYTS cable mainly used?

A: Telecommunication backbone network, city metro network, residential community, highway and railway communication engineering.

Q5: Can it be laid overhead and underground?

A: Yes, it supports aerial installation, duct and pipeline direct burial laying.

Q6: Is customization available?

A: Custom fiber core number, outer sheath color and length are all acceptable with low MOQ.