Français
Deutsch
Italiano
Русский
Español
Português
Nederlandse
Ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
Indonesia
Tiếng Việt
ไทย
বাংলা
فارسی
Polski
0.6/1KV YJV32 XLPE Power Cable Steel Armoured Pure Copper Conductor Cable
1KV XLPE Power Cable
,0.6KV XLPE Power Cable
,YJV32 copper conductor cable
XLPE Power Cable 0.6/1KV YJV32 Steel Armoured Pure Copper Conductor Cable
|
Model |
YJV32 (steel tape armoured) |
|
Voltage rating |
0.6/1kV (U₀/U) |
|
Conductor |
Pure annealed copper, class 2 stranded – no copper‑clad or recycled scrap |
|
Core configurations |
2 core, 3 core, 4 core, 5 core, or 3+1, 4+1, 3+2 (tell us your need) |
|
Conductor size |
1.5mm² up to 400mm² – same price formula per kg of copper |
|
Insulation |
XLPE (cross‑linked polyethylene) – 90℃ continuous, 250℃ short‑circuit |
|
Armour |
Double layer galvanized steel tape (0.2–0.5mm thick depending on size) |
|
Outer sheath |
Black PVC, flame retardant, UV stabilised |
|
Standard |
GB/T 12706.1‑2020 (also passes IEC 60502‑1 tests) |
|
Certification |
Factory test report included; CE or TUV available at extra cost |
-
Copper stranding – We use 99.95% pure copper wire rods from Jiangxi Copper. For a 4×70mm² cable, the 70mm² conductor has 19 strands of 2.14mm wire. DC resistance test is done on every production lot – we keep the values 3% below the GB max limit as a safety buffer.
-
XLPE extrusion – The insulation goes through a continuous vulcanisation tube (CV line). We take a hot‑set sample every 2 hours: 200℃, 20N/cm², elongation must stay under 80%. If it hits 85%, the whole batch gets re‑run.
-
Assembly & filling – For round cores (3 or 4 equal), we twist the cores with PP filler ropes. For 3+1 or 4+1 shapes, we use a central filler to keep the neutral core in the gap. A polyester binder tape wraps everything to hold shape before the inner sheath.
-
Inner PVC sheath – 1.0–1.5mm thick (depends on the overall diameter). This layer is soft – its job is to stop the steel tape from digging into the XLPE when the cable is bent.
-
Steel tape armouring – Two layers of 0.3mm to 0.5mm galvanised steel strip (thicker for larger diameters). Applied helically with a gap – we measure the gap with a feeler gauge: must not exceed 45% of the tape width. Overlap between layers is about 25%. We run a continuity test on the armour: less than 0.5Ω per 100m.
-
Outer PVC sheath – Black, matte finish. We print the full specification every metre: “YJV32 0.6/1kV 4×95 + 1×50mm²” or whatever your order is.
4mm2 6mm2 10mm2 Pv1-F Solar Cable Tinned Copper DC PV Wire 1.5kV For Solar Panel System
PV1‑F Solar Cable 4mm² 6mm² 10mm² Tinned Copper DC PV Wire 1.5kV For Solar Panel System Our PV1-F solar cable is a dedicated DC transmission solution for all types of photovoltaic power systems. We focus on the most in-demand sizes—4mm², 6mm², 10mm²—and also offer full customization to fit your ...
10kV 35kV 110kV High Voltage Cable Copper Core XLPE Underground Power Wire
High Voltage Cable 10kV 35kV 110kV Copper Core XLPE Underground Power Cable Usage features Rated voltage: 3–35 kv Operating temperature: The maximum permissible long-term operating temperature of the cable conductor is 90 °C In the event of a short circuit, the maximum temperature of the cable ...
Copper Core XLPE Power Cable 0.6 1KV YJV32 3X6mm PVC Sheathed Electric Cable
Copper Core Power Cable 0.6/1KV YJV32 3X6mm XLPE Insulated PVC Sheathed Electric Cable YJV32 3x6mm² series is specifically engineered for environments requiring superior longitudinal tensile strength. By integrating a full circle of **Galvanized Steel Wire Armor (SWA)**, this cable eliminates the ...
3-35kV Overhead Insulated Cable XLPE Insulated Aerial Power Transmission Wire
Overhead Insulated Cable 3-35kV XLPE Insulated Aerial Power Transmission Wire PRODUCT DESCRIPTION It is suitable for overhead power lines with AC rated voltage of 35kV and below. It is used in cities andtowns, high-rise buildings, forest areas and other places with high safety requirements. USAGE ...
